Kyocera FS-1040 User Manual

1-3
Machine Parts
Operation Panel
Keys
Refer to the following table for the name and description of the basic functions of each key.
Key Status Operation Function
[Quiet Mode]
Key
— Press once (lights up). Turns on Quiet Mode.
Quiet Mode
If you prefer quiet operation, press
[Quiet Mode] to turn on Quiet
Mode. When Quiet Mode is on, the
print speed is slower.
— Press once (turns off). Turns off Quiet Mode.
[Cancel] Key — Press and hold for 1
second or longer.
Cancels the job being sent from the
PC.
[GO] Key At Ready Press once. Switches online/offline.
Press and hold for 5
seconds.
Prints the status page.
Press and hold for 10
seconds.
Prints the network status page. (FS-
1060DN/FS-1061DN only)
At Error Press once. Clears the error.
Indicators
There are two indicators located on the top right of the printer. The indicators are used to identify the status of the printer at
any time. To identify the printer status, check the indicators on the printer and then refer to the table below.
Indicator Status Meaning
Processing Indicator
(Green)
Lit Indicates online status (printing is possible).
Fast Flashing Offline status.
Slow Flashing The printer is processing data.
Very slow (5-second
interval) flashing
The printer is in sleep mode.
Off The power is off.
Attention Indicator
(Amber)
Lit One of the following problems has occurred on the printer. Check the
error message in KYOCERA Client Tool.
• The rear cover or front cover is open.
• Toner is empty.
• The drum unit is not installed.
Fast Flashing One of the following problems has occurred on the printer. Check the
error message in KYOCERA Client Tool.
• A paper jam has occurred.
• The top tray is full of paper. (The printer pauses after about 150
sheets are printed.)
• Memory is full.
• Non-genuine toner is installed.
Slow Flashing One of the following problems has occurred on the printer. Check the
error message in KYOCERA Client Tool.
• The paper has run out while printing.
• The toner is running low.
Off The printer status is normal. Or, the power is off.
Note For other combinations of the two indicators, call for service. KYOCERA Client Tool (software bundled with
the GX Driver) will provide more detailed information about the printer status. (Refer to KYOCERA Client Tool on
page 2-10.)

Kyocera FS-1040 Specifications

General

Print technology	Laser
Maximum resolution	1800 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Maximum duty cycle	- pages per month
Number of print cartridges	-
Mobile printing technologies	Not supported
Maximum internal memory	- MB
Sound power level (standby)	28 dB
Sound pressure level (printing)	50 dB
Sound pressure level (quiet mode)	49 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Plain paper
Paper tray media weight	60 - 220 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	5 W
Power consumption (printing)	304 W
Sustainability certificates	ENERGY STAR
Product color	Black, White

Weight and Dimensions

Depth	262 mm
Width	358 mm
Height	241 mm