Kyocera FS-1040 User Manual

4-6
Maintenance
Maintenance Menu
The Maintenance Menu that the user can adjust from the KYOCERA Client Tool is described below. In addition, also refer
to KYOCERA Client Tool User Guide.
Maintenance Menu Description
Adjust print
quality
Drum charge
setting
When print quality has deteriorated, the output of the main charger can be
changed to restore print quality.
Altitude setting If you are using the machine at an altitude of 1500 m or higher and print
quality has deteriorated, the Altitude setting can be used to restore print
quality.
Drum refresh Perform Drum Refresh when images show streaking with white lines.
Adjust print
position
Printing start
position
Single-sided printing
Adjusts the position of the printed
image.
Duplex printing
Adjusts the position of the image
printed on the back side of the paper
when duplex printing is used.
Restore factory default Restore factory default settings.
A
B
A: Top edge
B: Left edge
Top edge: 10

Kyocera FS-1040 Specifications

General

Print technology	Laser
Maximum resolution	1800 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Maximum duty cycle	- pages per month
Number of print cartridges	-
Mobile printing technologies	Not supported
Maximum internal memory	- MB
Sound power level (standby)	28 dB
Sound pressure level (printing)	50 dB
Sound pressure level (quiet mode)	49 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Plain paper
Paper tray media weight	60 - 220 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	5 W
Power consumption (printing)	304 W
Sustainability certificates	ENERGY STAR
Product color	Black, White

Weight and Dimensions

Depth	262 mm
Width	358 mm
Height	241 mm