Kyocera FS-1040 User Manual

4-4
Maintenance
4 Install the new toner container in the printer. Push in firmly until you
hear a "click" sound.
5 Close the front cover. Toner is replenished for about 4 seconds.
Maintenance Kit Replacement
When the machine prints 100,000 pages, a message is printed indicating that the maintenance kit should be replaced. The
maintenance kit must then be replaced immediately.
To replace the maintenance kit, contact your service technician.
Contents:
• Drum unit
• Developer unit
• Waste toner box
• Feed roller
• Lower paper feed guide
• Transfer roller
Note If the front cover does not close, check that the new
toner container is installed correctly (in step 4).
After use, always dispose of the toner container in
accordance with Federal, State and Local rules and
regulations.

Kyocera FS-1040 Specifications

General

Print technology	Laser
Maximum resolution	1800 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Maximum duty cycle	- pages per month
Number of print cartridges	-
Mobile printing technologies	Not supported
Maximum internal memory	- MB
Sound power level (standby)	28 dB
Sound pressure level (printing)	50 dB
Sound pressure level (quiet mode)	49 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Plain paper
Paper tray media weight	60 - 220 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	5 W
Power consumption (printing)	304 W
Sustainability certificates	ENERGY STAR
Product color	Black, White

Weight and Dimensions

Depth	262 mm
Width	358 mm
Height	241 mm