Section 5 OTHER CONVENIENT FUNCTIONS
5-36
6
Based on the left rear corner of the platen being a setting of
“0”, touch the “+” key or the “-” key to change the dimensions
of the scan area to the desired setting.
* In metric specification copiers, the dimensions can also be
entered directly by touching the “#keys” key and then using
the keypad.
Inch specifications
Back Close
Select original size
Ready to copy.
Select
size
2 11
5
/
8
22""
Input size
Set original on platen and input
scanning range. (Y side, X side)
Set
Paper Size
2 17
11x8
1
/
2
"
Register
Metric specifications
Back Close
Select size original
Ready to copy.
Select size
Input size
#-Keys #-Keys
Register
Scanning range can be set with
X-Y direction when original is
placed at left rear corner.
Set
Paper size
7
Press the [Start] key.
Copying will start.
To Next Page
Loading...
Need help?
General