Laser 5091 Code Reader User’s Guide
46
Laser 5091 Code Reader User’s Guide
47
9.5 Update Tool Settings
Settings option opens a screen that allows you to set the language and style of the tool. Still, it offers
the option for you to automatically check the update files from the server.
To set up the update tool:
1. Download and launch NT Wonder as instructed on page 43 of 9.1 Updating the Code Reader.
2. Activate the application by clicking the Settings from the menu.
3. Select the language and the style you want from the left to right column.
4. Select and tick the “Auto check for updates” on the bottom of the screen, then press Apply key
to confirm.
Trademarks
Laser Tools
®
is trademark of The Tool Connection Limited.
All other marks are trademarks or registered trademarks of their respective
holders.
Copyright Information
©2016 The Tool Connection Limited. All rights reserved.
Disclaimer
The information, specifications and illustrations in this manual are based on the
latest information available at the time of printing. The Tool Connection reserves
the right to make changes at any time without notice.
Visit our website at:
www.lasertools.co.uk
For Technical Assistance email us at
technical@lasertools.co.uk
One-Year Limited Warranty
Subject to the conditions of this limited warranty, The Tool Connection Limited
(TC) warrants its customer that this product is free of defects in material and
workmanship at the time of its original purchase for a subsequent period of one
(1) year.
In the event this product fails to operate under normal use, during the warranty
period, due to defects in materials and workmanship, TC will, at its sole option,
either repair or replace the product in accordance with the terms and conditions
stipulated herein.
The Tool Connection Limited
Kineton Road
Southam
Warwickshire
CV47 0DR
Tel: (0) 1926 815000
Fax: (0) 1926 815888
To Next Page
Loading...
Need help?
General
