Laser 5091 Code Reader User’s Guide
4
Laser 5091 Code Reader User’s Guide
5
7.2.1 Spark IGN Required Monitors........................................................................................... 35
7.2.2 Compression IGN Required Monitors ............................................................................... 36
7.2.3 Allowed INC Monitors ....................................................................................................... 37
7.2.4 Reset Factory Default ....................................................................................................... 38
7.3
UNIT OF MEASURE ..................................................................................................................... 38
7.4
KEY BEEP SET .......................................................................................................................... 39
7.5
DIAG BEEP SET ......................................................................................................................... 40
7.6
TOOL SELF-TEST ....................................................................................................................... 41
7.6.1 Display Test ..................................................................................................................... 41
7.6.2 Keypad Test ..................................................................................................................... 41
7.6.3 LED Test .......................................................................................................................... 42
8 TOOL INFORMATION .................................................................................................................... 43
9 PRINTING AND UPDATE .............................................................................................................. 44
9.1
UPDATE THE CODE READER ....................................................................................................... 44
9.2
PRINTING DATA ......................................................................................................................... 45
9.3
SEARCHING DTC ....................................................................................................................... 47
9.4
USER MANUAL ........................................................................................................................... 47
9.5
UPDATE TOOL SETTINGS ............................................................................................................ 48
1 Using This Manual
Below are the conventions we use in this manual:
1.1 Bold Text
Bold text is used to highlight selectable items such as buttons and menu options.
Example:
Press the ENTER button to select.
1.2 Symbols and Icons
1.2.1 Solid Spot
Operation tips and lists that apply to specific tool are introduced by a solid spot●.
Example:
When System Setup is selected, a menu that lists all available options displays. Menu options
include:
Languages.
Configure monitors
Unit of measure.
Key Beep Set
D
iag Beep Set
Tool self-test
1.2.2 Arrow Icon
An arrow icon indicates a procedure.
Example:
To change menu language:
1. Use the UP/DOWN key to highlight Language on the menu.
2. Press the ENTER button to select.
1.2.3 Note and Important Message
Note:
A NOTE provides helpful information such as additional explanations, tips, and comments.
Example:
NOTE:
Test results do not necessarily indicate a faulty component or system.
Important
IMPORTANT indicates a situation which, if not avoided, may result in damage to the test
equipment or vehicle.
Example:
IMPORTANT:
Do not soak keypad as water might find its way into the code reader.
2 Introduction
The LASER 5091 is an OBDII and EOBD code reader; it is specially designed to support all 10 OBDII
service modes, including live data, O2 sensor test and more, on OBDII/EOBD compliant cars, SUVs,
and light commercial vehicles sold worldwide since 2001 (petrol engines) / 2004 (diesel engines).
To Next Page
Loading...
Need help?
General
