23
Space Temperature and Space Humidity Display
On the main screen of the controller, you can view the current setpoint, space temperature and
space humidity.
When the master wired controller chooses the Follow function, the Space Temp will display the
temperature and corrected value detected by the temperature sensor of the master wired controller
itself.
When the master and Sub wired controllers do not choose the Follow function, their Space Temp
will display the temperature detected by their own temperature sensors (without a corrected value).
The temperature sampling range is -16°F to 156°F (-9°C to 70°C). The humidity sampling range
is 0% to 100%.
Figure 19. Setpoint, Space Temperature & Space Humidity Display
To Next Page
Loading...
Need help?
General
