Lennox V0STAT51P-3 User Manual

80
3. Slide the Heat On temperature value below Auxiliary heat. The highlighted value in the
middle is the currently selected parameter. This means that when the indoor ambient tem-
perature is Δt1 lower than the set temperature, the external heat source is turned on.
4. Slide the Heat O󰀨 temperature value below Auxiliary heat. The highlighted value in the
middle is the currently selected parameter. This means that when when the indoor ambient
temperature is Δt2 higher than the set temperature, the auxiliary heat source is turned o󰀨.
Figure 104. Auxiliary / Alternate Heat ON and OFF Settings

Lennox V0STAT51P-3 Specifications

General

Brand	Lennox
Model	V0STAT51P-3
Category	Controller
Language	English