Chapter 2. Using your computer
Putting your computer to standby or shutting it down
When you finish working with your computer, you can put it to standby or shut it
down.
The computer with the solid state drive (SSD) does not support hibernation function.
Putting your computer to standby
If you will be away from your computer for only a short time, put the computer to
standby.
When the computer is in standby, you can quickly wake it and bypass the startup
process.
To put the computer to standby, do one of the following.
v Click Start and select Standby from Turn Off Computer.
v Press Fn + F1.
WARNING
Wait until the power indicator light starts blinking (indicating that the computer is in
standby) before you move your computer. Moving your computer while the hard disk is
spinning can damage the hard disk, causing loss of data.
© Copyright Lenovo 2008 9
To Next Page
Loading...
Need help?
General