Product description
Application as directed
3
l
12
EDSMF2133IB EN 5.0
3 Product description
3.1 Application as directed
The communication module ...
ƒ is an accessory module which can be used in conjunction with the following Lenze
standard devices:
Device type Design
Version
Variant Explanation
HW SW
82EVxxxxxBxxxXX Vx 1x 8200 vector
82CVxxxxxBxxxXX Vx 1x 8200 vector, cold plate
82DVxxxKxBxxxXX Vx 1x 8200 vector, thermally
separated
EPL 10200 E 1x 8x Drive PLC
33.93XX xE. 2x 1x Vxxx 9321 − 9332
33.938X xE. 1x 0x 9381 − 9383
33.93XX xC. 2x 1x Vxxx 9321 − 9332, cold plate
33.93XX EI / ET 2x 8x Vxxx 9300 Servo PLC
33.93XX CI / CT 2x 8x Vxxx 9300 Servo PLC, Cold plate
ECSxSxxxx4xxxxXX
1)
1A 6.0 ECSxS (Speed and Torque)
ECSxPxxxx4xxxxXX
1)
1A 6.0 ECSxP (Posi and Shaft)
ECSxMxxxx4xxxxXX
1)
1A 6.0 ECSxM (Motion)
ECSxAxxxx4xxxxXX
1)
1A 2.3 ECSxA (Application)
1) The standard device cannot be used with the DRIVECOM or PROFIdrive control.
ƒ is a device intended for use in industrial power systems.
Any other use shall be deemed inappropriate!
To Next Page
Loading...
Need help?
General
