Commissioning
Initial switch−on
6
l 33
EDSMF2133IB EN 5.0
Detailed
information
ProcedureStep
11. It is now possible to communicate with the controller, i.e.
l exchange process data (setpoints and actual values);
l read all codes;
l change all codes that can be written.
See the attribute table or code description of the corresponding standard
device.
Response
The yellow LED on the communication module is blinking when the PROFIBUS
is active.
12. Enable standard device via terminal. Documentation of
the standard device
To Next Page
Loading...
Need help?
General
