27
9. Safety harness
The safety harness consists of two parts: a chest strap and a knee support.
Caution: Before attempting to stand in your wheelchair, fit and adjust
the chest strap and the knee support.
9.1. Knee support
The knee support helps your knee not to bend in the standing position and to
keep you in the perfect position during the stand-up motion.
9.1.1. Knee support „Pro“
9.1.2. Knee support „Integral“
You can insert the knee support with
just one hand.
To remove the knee support, pull it
gently back and then upwards.
If the adjustment is incorrect, please
see section 11.9. to adjust the knee
support.
Adjustable knee pads are available.
To use the knee support, make sure
that it is correctly adjusted.
Pull the quick release knob (A) and
bring the knee support into position.
Release the quick release knob and
make sure it is locked in place. If the
adjustment is incorrect, please see
section 11.9. to adjust the knee
support.
Adjustable knee pads are available.
There is a park position which allows
the “Knee support Integral” to be
swung aside during transfer.
To Next Page
Loading...
Need help?
General