42
13.3.1. Securing the wheelchair with a WTORS restraint system
Tie-down strap angles:
When fitted tie-down straps angles should fall within the preferred angles shown
below.
Preferred angles for front tie-down straps Preferred angles for rear tie-down straps
Danger!
- Standard ISO 10542-1 approved 4 point WTORS (Wheelchair Tie Down and
Occupant Restraint Systems), are only tested to 85 kg.
- For wheelchairs heavier than 85 kg it is recommended to use to use an ISO
10542-1 compliant WTORS (Heavy Duty System), which is rated for the total
weight of the wheelchair including any options. If using a Heavy Duty
System, use 4 straps to secure the wheelchair, 2 straps at the front and 2
straps at the back.
- If using a standard 4 point WTORS for securing a wheelchair heavier than 85
kg, use 6 straps to secure the wheelchair, 2 straps at the front and 4 straps
at the back.
- Never use equipment not labeled with ISO 10542.