49
18. Controller self help guide VR2
The battery indicator provides information in case a fault occurs to the
wheelchair’s electronical system. An appropriate number of lights flash rapidly on
the display for a particular fault. Please see below.
An excessive voltage has been applied to the control
system. This is usually caused by a poor battery
connection. Check battery and power module
connections. If the fault remains contact your local
agent.
The parking brakes have a bad connection. Make sure
all connectors are plugged in properly. If the fault
remains contact your local agent
Possible power
module fault
A Power Module fault is indicated. Make sure all the
power module connections are pushed in properly.
Possible joystick
module fault
A joystick fault is indicated. Make sure the joystick is in
the rest position before switching on.
The battery charger is plugged into the wheelchair.
Unplug the charger from the joystick module.
The right-hand motor has a short circuit to a battery
connection. Contact your local agent.
The right-hand motor has a bad connection. Make sure
the motor connector is plugged in properly.
The left-hand motor has a short circuit to a battery
connection. Contact your local agent.
The left-hand motor has a bad connection. Make sure
the motor connector is plugged in properly.
The battery needs charging or there is a bad connection
in the battery. Check connections to the battery, power
module and joystick module.
Please contact your local specialist if advice above does not solve the problem.
Please provide your specialist with the serial number of your LEVO C
3
which is
noted on the warranty card. This number might be important in case of questions
to the manufacturing company LEVO AG.
To Next Page
Loading...
Need help?
General