Use To
Portrait Width
3–8.5 inches
76–216 mm
Set the width for portrait orientation.
Notes:
• If the width exceeds the maximum, then the printer uses the
maximum width allowed.
• 8.5 inches is the US factory default setting. You can increase the
width in 0.01‑inch increments.
• 216 mm is the international factory default setting. You can increase
the width in 1‑mm increments.
Portrait Height
3–14.17 inches
76–360 mm
Set the width for portrait orientation.
Notes:
• If the height exceeds the maximum, then the printer uses the
maximum height allowed.
• 14 inches is the US factory default setting. You can increase the
height in 0.01‑inch increments.
• 356 mm is the international factory default setting. You can increase
the height in 1‑mm increments.
Reports menu
Reports menu
Use To
Menu Settings Page Print a report containing information about paper loaded in trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the network
connection, and other information.
Device Statistics Print a report containing printer statistics such as supply information and details
about printed pages.
Network Setup Page Print a report containing information about the network printer settings, such as
the TCP/IP address.
Note: This menu appears only in network printers or printers connected to
print servers.
Network [x] Setup Page Print a report containing information on network printer settings, such as the
TCP/IP address information.
Notes:
• This menu item is available only when more than one network option is
installed.
• This menu item appears only in network printers or in printers connected
to print servers.
Profiles List Print a list of profiles stored in the printer.
Understanding the printer menus 86
To Next Page
Loading...
Need help?
General
