• Install additional printer memory.
39 Complex page, some data may not have printed
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press to clear the message and continue printing.
• Cancel the current print job.
• Install additional printer memory.
51 Defective flash detected
Try one or more of the following:
• Replace the defective flash memory card.
• Press the arrow buttons until Continue appears, and then press to clear the message and continue printing.
52 Not enough free space in flash memory for resources
Try one or more of the following:
• Press to clear the message and continue printing.
• Delete fonts, macros, and other data stored in flash memory.
• Upgrade to a larger capacity flash memory.
• Press , and then press to cancel printing.
53 Unformatted flash detected
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press to continue printing.
• Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
54 Standard network software error
Try one or more of the following:
• Press the arrow buttons until Continue appears, and then press to continue printing.
• Turn the printer off and then back on to reset the printer.
• Upgrade (flash) the network firmware in the printer or print server.
56 Standard USB port disabled
Try one or more of the following:
• The printer discards any data received through the USB port. Press to clear the message and continue printing.
• Make sure the USB Buffer menu item is not set to Disabled.
Troubleshooting
108
To Next Page
Loading...
Need help?
General