Paper menu
Default Source menu
Menu item Description
Default Source
Tray <x>
MP Feeder
Manual Paper
Manual Env
Sets a default paper source for all print jobs
Notes:
• From the Paper menu, Configure MP must be set to Cassette in order for
MP Feeder to appear as a menu setting.
• Tray 1 (standard tray) is the factory default setting.
• Only an installed paper source will appear as a menu setting.
• A paper source selected by a print job will override the Default Source
setting for the duration of the print job.
• If the same size and type of paper are in two trays and the Paper Size and
Paper Type settings match, the trays are automatically linked. When one
tray is empty, the job prints using the linked tray.
Size/Type menu
Menu item Description
Select Source menu
Tray 1
Tray 2
MP Feeder
Manual Paper
Manual Env
Lets you specify the installed paper size and type in the selected tray or
multipurpose feeder
Note: Only installed trays and feeders are listed in this menu.
Set Size menu for Tray 1 or Tray 2
A4
A5
A6
JIS B5
Executive
Folio
Legal
Letter
Oficio (Mexico)
Statement
Universal
Lets you specify the paper size loaded in each tray
Notes:
• Letter is the US factory default setting. A4 is the international factory
default setting.
• If the same size and type of paper are in two trays and the Paper Size and
Paper Type settings match, then the trays are automatically linked. When
one tray is empty, the job prints using paper from the linked tray.
• The A6 paper size is supported only in Tray 1.
Understanding printer menus
57
To Next Page
Loading...
Need help?
General