117
ENGENGLISH
MAKING CONNECTIONS
Euro Scart Connection
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the Euro Scart cable as
shown on the following illustration. To display im-
ages by using progressive scan, make sure to use
the Euro Scart cable.
y
Any Euro scart cable used must be
signal shielded.
y
When watching digital TV in 3D imaging
mode, monitor out signals cannot be
output through the SCART cable. (Only
3D models)
y
If you set the 3D mode to On while a
scheduled recording is performed on
digital TV, monitor out signals cannot
be output through the SCART cable,
and the recording cannot be performed.
(Only 3D models)
NOTE
y If cables are installed incorrectly, it could
case the image to display in black and
white or with distorted colour. Check to
ensure the cable are matched with the
corresponding colour connection.
NOTE
Component Connection
Transmits the analogue video and audio signals
from an external device to the TV. Connect the
external device and the TV with the component
cable as shown in the following illustration.
Output Type
Current
input mode
AV1
(TV Out
1
)
AV1
(When DTV sched-
uled recording is in
progress using
recording equip-
ment.)
Digital TV Digital TV
O
Analogue TV, AV Analogue TV
O
(The input mode is
converted to DTV.)
Component/RGB Analogue TV
HDMI X X
1 TV Out : Outputs Analogue TV or Digital TV
signals.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
