31
ENGENGLISH
WATCHING TV
Managing programmes
Selecting Antenna,
Use this to automatically find and store all available
programmes.
When you start auto programming, all previously
stored service information will be deleted.
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to
Auto Tuning and press OK.
5 Press the Navigation buttons to scroll to
Antenna and press OK.
6 Select Start to start automatic tuning.
The TV scans and saves available programmes
automatically.
7 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
y If the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.
y Y
ou can store up to 1,200 programmes (Except
for Satellite models) or 6,000 programmes(Only
Satellite models). The number of programmes
that you can store differs depending on the
broadcasting signal environment.
y When select Italy in the
Country
menu, if the
pop up is displayed when the conflicted pro-
gramme after Auto Tuning, select a broadcast-
er for conflicting programme number to solve.
y
When select UK in the Country menu, if the pop
up is displayed when the conflicted programme
after Auto Tuning, select a regions, country for
conflicting programme number to solve.
y When selected Norway in the Country menu,
If Network name is recognized more than two
after Auto Tuning, you can select your desired
one. Programme lists are arranged based
on the selected Network name. (Only Nordic
models)
y In the following country, DVB cable can be used
: Germany, Netherlands, Sweden, Switzerland,
Denmark, Austria, Finland, Norway, Slovenia,
Hungary, Ukraine, Bulgaria, Ireland, Poland,
Romania, Russia, Lithuania, Estonia, Latvia,
Spain. (The supported country can be added.)
Automatically setting up programme
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to
Auto Tuning and press OK.
5 Press the Navigation buttons to scroll to
Cable and press OK.
6 Press the Navigation buttons to scroll to
Service Operator and press OK.
7 Press the Navigation buttons or Number but-
tons to scroll make appropriate adjustments
and press OK.
8 Select Start to start automatic tuning.
The TV scans and saves available pro-
grammes automatically.
9 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Selecting Cable,
NOTE
y If the TV scans a blocked programme, you
will be prompted to enter your password to
keep the programme scanned.
y Use this to automatically find and store all
avail able programmes. When you start auto
programming, all previously stored service
information will be deleted.
y When you select the Cable, the Cable
Service Operator selection screen can differ
or not exist by the Cable situation of the ap-
plicable country.
y The popup window to select Service Opera-
tor is only shown initially for the 3 cases
when you accessing the Initial Setting
menu, when you change from Antenna to
Cable or when you access the menu after
changing the Country.
y When you want to select Service Operator
aside from the above 3 cases, you can do so
by selecting Setup->Cable DTV Setting->
Service Operator.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
