26
ENG
ENGLISH
REMOTE CONTROL
This item is not included for all models.
Refer to the Magic Motion Remote Control manual for operating instructions.
Please read this manual carefully and use the TV correctly.
When the message "Magic motion remote control battery is low. Change the
battery." is displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA)
matching and ends to the label inside the compartment, and close the
battery cover. Be sure to point the remote control toward the remote control
sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
Magic Motion Remote Control Functions
(POWER)
Turns the TV on or off.
Navigation buttons (up/down/
left/right)
Scrolls through menus or options.
Pointer (RF transmitter)
Blinks the light when operating.
+ -
Adjusts the volume level.
P
Scrolls through the saved pro-
grammes.
Home
Accesses the Home menu.
OK
Selects menus or options and
confirms your input.
Press this button to display the
pointer when it disappears from the
screen. You can control the TV by
selecting Quick Menu on the screen.
-
If you press the Navigation button
while moving the pointer on the
screen, the pointer disappears, and
the Magic Motion remote control
works as a common remote control.
To display the pointer again, shake
the Magic
Motion remote control
from side to side within two minutes
after it disappeared.
(If two minutes
have passed, press the OK button
to display the pointer.)
MUTE
Mutes all sounds.
y
Do not mix old and new batteries, as this may damage the remote control
CAUTION
Home Menu
Programme List
Quick Menu
(Only 3D models)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
