41
ENGENGLISH
WATCHING TV
Using additional options
Adjusting aspect ratio
Resize an image to view at its optimal size by
pressing RATIO while you are watching TV.
y You can also change the image size by
pressing Q. MENU or accessing Aspect
Ratio in the PICTURE menus.
y You can adjust the enlarge proportion
using the Navigation buttons.
y You can only select 4:3, 16:9 (Wide),
14:9, Cinema Zoom in Component
mode.
y You can only select 4:3, Original, 16:9
(Wide), 14:9, Cinema Zoom in HDMI
mode.
y You can only select 4:3, 16:9 (Wide) in
RGB-PC, HDMI-PC mode only.
y In DTV/HDMI/Component (over 720p)
mode, Just Scan is available.
y In Analogue/DTV/AV/Scart mode, Full
Wide is available.
NOTE
- 16:9: Resizes images to fit the screen width.
- Just Scan: Displays video images in the origi-
nal size without removing parts of the edge of
the image.
y If you select Just Scan, you may see
image noises at the edge or edges of the
screen.
NOTE
Just Scan
- 4:3: Resizes images to the previous standard
4:3.
-
Full Wide: When TV receives the wide
screen signal, it will let you adjust the
picture horizontally or vertically, in a linear
proportion,to fill the entire screen fully.
4:3 and 14:9 video is supported in full screen
without any video distortion through DTV
input.
-
Original: When your TV receives a wide
screen signal it will automatically change to the
picture format broadcasted.
Original
Full Wide
To Next Page
Loading...
Need help?
General
Weight and Dimensions
