LG 42LW650T User Manual

34
ENG
ENGLISH
WATCHING TV
Cable DTV Setting
The range that a user can select from the Service
Operator menu differs depending on number of
Service Operator supported by each country, and
if number of supported Service Operator for each
country is 1, corresponding function becomes non-
activation.
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to Cable
DTV Setting and press OK.
5 Press the Navigation buttons to scroll to Serv-
ice Operator or Channel Auto update and
press OK.
6 Select your desired Source.
7 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Satellite DTV Setting
You can add or delete a satellite setting ID.
1 Press Home to access the Home menu.
2 Press the Navigation buttons to scroll to
SETUP and press OK.
3 Press the Navigation buttons to scroll to
SETUP and press OK.
4 Press the Navigation buttons to scroll to Satel-
lite DTV Setting and press OK.
5 Select your desired setting ID.
You can change the following settings for each
setting ID for your preferences.
(In Satellite, Antenna & Satellite, Cable & Satellite
mode only-Only Satellite models)
(In Cable, Cable & Satellite(-Only Satellite models)
mode only)
Option Description
Satellite Select your desired Satellite.
LNB
Frequency
Select one value from Universal, 9750,
10600, 5150.
If you select Universal for LNB Frequency
which is 9750/10600(MHz), 22KHz Tone
is disabled.
If you cannot find the LNB frequency value
from the list, select User and manually
enter the frequency.
22KHz Tone When using 22KHz Tone switch, select A
or B. If you use 22KHz Tone, Tone Burst
and Motorized System are disabled.
Tone Burst When using Tone Burst switch, select A
or B. If you use Tone Burst, 22KHz Tone
and Motorized System are disabled.
LNB Power To enable the power supply for the LNB,
select On.
If you select Off, Motorized System is
disabled.
DiSEqC When using DiSEqC, select one option
from DiSEqC A~D. If you use DiSEqC,
Motorized System is disabled.
Motorized
System
When using the motor, select On. To set
the antenna position, press OK button
and move the motor. If you use the motor,
22KHz Tone, Tone Burst and DiSEqC
are disabled.
NOTE
y When Channel Auto Update is On, you can
update information for all the programmes
that can be updated, including the pro-
gramme currently being watched.
y When Channel Auto Update is Off, you can
only update information for the programme
currently being watched.
y You can not select the Cable DTV Setting
when the service operator is set to "Ziggo".

LG 42LW650T Specifications

General

Display diagonal	42 \
Display brightness	400 cd/m²
Native aspect ratio	16:9
LED backlighting type	-
Supported video modes	1080i, 1080p, 720p
Contrast ratio (dynamic)	9000000:1
3D	Yes
Number of speakers	2
DVI port	No
HDMI ports quantity	4
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Smart modes	Cinema, Game
Panel mounting interface	400 x 400 mm
Power consumption (standby)	0.2 W
Power consumption (typical)	89 W

Weight and Dimensions

Depth (with stand)	255 mm
Height (with stand)	686 mm
Weight (with stand)	16200 g
Depth (without stand)	29.9 mm
Width (without stand)	1009 mm
Height (without stand)	622 mm
Weight (without stand)	13400 g