ENGLISH
12
General
Conguration Setup
On Timer Operation
• It is a mode to select ‘Timer Power On’ working one time or repeatedly.
• 'Once': ‘Timer Power On’ in the user menu operates only one time when the Timer Power On menu is set to On.
• ‘Repeat’ : ‘Timer Power On’ operates repeatedly when the Timer Power On menu is set to On.
USB Auto Playback
(Depending upon model)
• When ‘USB Auto Playback’ is set to ‘Movie’, Signage nds and plays the USB’s movie les located at the root(top)
directory Movies if USB is plugged in.
• When ‘USB Auto Playback’ is set to ‘Photo’, Signage nds and plays the USB’s photo les located at the root(top)
directory Photos if USB is plugged in.
• If it reaches the last le, it starts the rst le again
Auto Sensing
• If ‘Auto Sensing’ is set to ‘On’, the input is automatically switched when the input signal that you set to “ON’ is
received.
• If ‘Auto Sensing’ is set to ‘Disable’, the input is not switched when the input signal is received.
-
SIMPLINK and Auto Sensing cannot work simultaneously. If SIMPLINK is set to On, Auto Sensing is
automatically set to Disable.
-
If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to the
previous setting.
If the several input are connected by enabling Auto Sensing and the automatic input returns to the
previous setting.
If the several inputs are connected by enabling Auto Sensing and the automatic input switch is
performed several times, the input returns to the previous setting only for the last input and does not
repeat the operation for the rest.
To Next Page
Loading...
Need help?
General
