ENGLISH
6
Public Display Settings
When ‘Public Display Settings’ is set to On (Work), all functions of Public Display Mode apply.
Public Display Settings
• Decide to work all functions of ‘Public Display Settings’ or not by setting ‘Public Display Settings’ as On (Work)
or O (Do Not Work).
• When ‘Public Display Settings’ is set to On (Work), all functions of Public Display Mode apply.
• When ‘Public Display Settings’ is set to O (Do Not Work), all functions of Public Display Mode Do Not apply.
• When it is set to ‘On’, all items reserved at the Schedule list are deleted and the reservation function is not
supported. (applied for the model oering the reservation function)
Power On Status
• Decide to select working status of Signage Set when turn on main power.
• You can set with PWR, STD, LST.
• PWR always make Signage set On status when turn on main power.
• STD make Stand-by status when turn on main power.
• LST make Signage Set work like previous power status. As same concept as Power Backup mode; If main power
were turned o in Power On status, Signage Set would work in On status. If main power were turned o in
Stand-by status, Signage Set would work in Stand-by status.
• If there Block All is both IR Operation and Local Key Operation from Key Management, In order to provide the
Option that must be able to turn on the Signage in the Signage turned o situation, change the value of the
PWR. (Reference the Key Management)
To Next Page
Loading...
Need help?
General
