LGE Internal Use Only
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4. TROUBLE SHOOTING
- 99 -
4.7.4 Checking PAM Block
TP1. GSM_PA_RAMP : Power Amp Gain Control. typically, 0.2V < Vramp < 1.6V
TP2. GSM_PA_EN : Power Amp Enable
(Power ON : higher than 1.25V , Power OFF : lower than 0.4V)
TP3. GSM_PA_BAND : Power Amp Band Selection Control
(GSM Mode : -0.2V < VBS < 0.4V , DCS/PCS Mode : 1.25V < VBS < 3.0V)
TP4. +VPWR : PAM Supply Voltage Vcc higher than 3.0V
Schematic of GSM PAM Block