3. Turn on the unit by pressing .
4. Press F until OPTICAL function is selected.
You can see “LG OPT” on the display window if connecting normally between this unit and your
TV.
LG Sound Sync with wireless connection
1. Turn on the unit by pressing .
2. Press F until LG TV function is selected.
3. Set up the sound output of TV to listen to the sound through this unit :
TV setting menu [Sound] → [TV Sound output] → [LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for about 3 seconds and then you can see “LG TV” on
the display window if the TV and this unit are connected normally.
Note
You can also use the remote control of this unit while using LG Sound Sync. If you use TV’s
remote control again, the unit synchronizes with the TV. (According to TV Specifications, the
volume and mute of this unit synchronize with TV.)
If the connection fails, check the conditions of this unit and your TV : power, function.
Make sure of the condition of this unit and the connection in the cases below when using LG
Sound Sync.
The unit is turned off.
Changing to a different function.
Disconnecting the wireless connection caused by interference or a distance.
Disconnecting the optical cable.
If you try to change the function on using the LG TV function, volume will be change according to
the LG TV volume level.
Details of TV setting menu vary depending on models of your TV.
If you turned off the unit directly by pressing , LG Sound Sync will be disconnected. To use this
function again, you should reconnect the TV and the unit.
The volume may be increased when the TV and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect with this unit.
When you turn on your LG TV connected by LG Sound Sync or enter LG TV function, this unit
changes the function to LG TV automatically.
You should set the TV Sound output manually depending on the TV version.
If you control TV volume when this unit and TV are connected by LG Sound Sync, this unit may
louder the volume due to synchronizing volume with TV’s.
USB Connection
Connect a USB device (or MP3 player, etc.) to the USB ports on the unit.
To Next Page
Loading...
