For stable recording, the output sound level goes down on its own when you record music from
CD to USB.
You can only change volume level between MIN and 30 during recording. (Only CD function)
When you stop recording, the file that has been recorded at that time will be stored. (Except
when recording MP3/ WMA files that are in stop status.)
Do not remove the USB device or turn off the unit during USB recording. If does not, an
incomplete file may be made and not deleted on PC.
If USB recording does not work, the message like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the display window.
Multi card reader device or external HDD can not be used for USB recording.
A file is recorded by about 512 Mbyte when you record for a long term.
Note
You can record various sound using DJ EFFECT, DJ SCRATCH, DJ PAD, PARTY KICK STARTER or MIC.
(Except when recording USB/ CD that are in stop status.)
You can control recorded microphone sound according to microphone volume.
You may not store more than 2,000 files.
In case of the unsupported MP3/WMA file, the file recording may be stopped.
When you are recording during playback, the sound now playing is output.
It’ll be stored as follows.
* : AUX and the like.
Tuner : The current recording frequency is shown.
JUKE BOX Playback
JUKE BOX function enables you to make a playlist of your favorite tracks/files from a disc or USB
device. A playlist of up to 100 tracks/files can be entered.
Making JUKE BOX list
1. Press and hold JUKEBOX / MEMORY on the remote control to enter the edit mode. (Playing will be
stopped when you press JUKEBOX/MEMORY on the remote control.)
2. Select a track/file by pressing C/V on the remote control.
3. Press JUKEBOX/MEMORY on the remote control to save the track/file.
4. Repeat steps 2 – 3 to store other tracks/files. (You can modify the list by pressing PRESET·FOLDER
W/S on the remote control to select the JUKE BOX program number.)
5. Press JUKEBOX/MEMORY on the remote control once again.
To play the JUKE BOX list, press Play/Pause on the remote control after you make the list.
Note
To Next Page
Loading...
Need help?
General
