BASS → SOPRANO → HELIUM → ROBOT → DUET MAN → DUET WOMAN → BASS ECHO1 → SOPRANO →
ECHO1 → HELIUM → ECHO1 → ROBOT → ECHO1 → DUET MAN1 → DUET WOMAN1 → BASS ECHO2 →
SOPRANO ECHO2 → HELIUM ECHO2 → ROBOT ECHO2 → DUET MAN2 → DUET WOMAN2 → OFF
Note
If a microphone is not connected, “INSERT MIC” appears in the display window.
If you press KEY CHANGER, DJ EFFECT or MIC ECHO on the unit on VOCAL EFFECTS mode, after
backing up current VOCAL EFFECTS, turn off VOCAL EFFECTS mode and operate KEY CHANGER, DJ
EFFECT or ECHO mode.
To turn off VOCAL EFFECTS mode, press and hold VOCAL EFFECTS on the unit.
ECHO
When you connect your microphone to the MIC jack, you can give an echo effect to the sound from the
microphones by pressing MIC ECHO.
ECHO 1 → ECHO 2 → ECHO OFF
Note
If a microphone is not connected, “INSERT MIC ” appears in the display window.
If you press VOCAL EFFECTS button on ECHO mode, after backing up current ECHO, turn off ECHO
mode and operate VOCAL EFFECTS mode.
Press MIC ECHO again, after backing up current VOCAL EFFECTS, operate ECHO mode.
LIGHTING
This function offers a party atmosphere by operating the lighting on the unit.
Press LIGHTING on the unit repeatedly or press LIGHTING on the unit and then turn DJ SCRATCH /
LEVEL CONTROL on the unit.
RHYTHM → PARTY → FIREWORK → SPACE → WATER → FOREST → CITYGLOW → (MYSTYLE) → OFF
Note
Lighting function is available in all functions.
Lighting mode retains its previous mode when you first press LIGHTING on the unit, press again to
change modes.
If you want to use MYSTYLE, you have to register a source with “Music Flow Bluetooth” app.
If you want to enjoy the dynamic lighting effect, select the RHYTHM or the PARTY.
Do not look directly at the light emitting part when the LIGHTING is turned on.
If the illumination brightness is glaring, switch on the room lights or turn off the LIGHTING of the
unit.
To turn on or off upper and lower lighting LED, press and hold LIGHTING on the unit for 3 seconds
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to select delay time between 10 and 180 minutes. After
the delay time, the unit will be turned off.
To cancel the sleep function, press SLEEP on the remote control repeatedly until “OFF” appears.
Note
To Next Page
Loading...
Need help?
General
