If you want to change sound effect, you have to record a sound effect with “Music Flow Bluetooth”
app.
In case of CHILDSAFE mode, Party Kick Starter sound is not output.
Using BLUETOOTH® wireless technology
About Bluetooth
Bluetooth is wireless communication technology for short range connection.
The sound may be interrupted when the connection interfered by the other electronic wave or you
connect the Bluetooth in the other rooms. Connecting individual devices under Bluetooth wireless
technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be
operated via the Cascade if the connection was made via Bluetooth wireless technology.
Available Devices : Smart phone, MP3, Notebook, etc.
Version : 4.0
Codec : SBC, AAC
Bluetooth Profiles
In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. This
unit is compatible with following profile. A2DP (Advanced Audio Distribution Profile)
Listening to music stored on the Bluetooth devices
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make sure the Bluetooth feature is activated on your Bluetooth
device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not
need to be performed again.
1. Turn on the unit.
Note
When Bluetooth connection lock is activated, you can search Bluetooth device in BT function.
2. Operate the Bluetooth device and perform the pairing operation. When searching for this unit with
the Bluetooth device, a list of the devices found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your unit appears as “LG OK99 (XX)”.
Note
XX means the last two digits of Bluetooth address. For example, if your unit has a
Bluetooth address such as 9C:02:98:4A:F7:08, you will see “LG OK99 (08)” on your
Bluetooth device.
Depending on the Bluetooth device type, some devices may have a different pairing
process. Enter the PIN code (0000) as needed.
You can connect this unit with up to 3 Bluetooth devices simultaneously using the same
method as described above, only in the Bluetooth function.
The multi phone pairing connection is only supported on Android devices. (Multi phone
pairing connection may not be supported depending on the connected device
specifications.)
Removable/detachable Bluetooth devices (Ex: Dongle etc.) will not support multi phone
pairing.
3. When this unit is successfully connected with your Bluetooth device, “PAIRED” appears on the
display window and change to Bluetooth device name soon. Then “BT” will appear on the display
window.
Note
“PAIRED” will momentarily appear on the display when you connect other devices for
multi phone pairing.
If the device name is unavailable, “_” will be displayed.
4. Listen to music.
To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide.
Note
When using Bluetooth technology, you have to make a connection between the unit and
the Bluetooth device as close as possible and keep the distance. However, it may not