19
PREPARATION
How to Install the Projector On a Tripod
y
You can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on the tripod.
y
When stabilizing the tripod, we recommend using a locking bolt of standard size
4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm.
(If it is longer than the maximum allowed size, it may damage the projector.)
+
The projector is
connected to this part.
Tripod
Bolt used to
attach the
projector
Bottom side of the projector
CAUTION
y
If you are using a tripod, be careful not to apply external force to the tripod. Doing
so may damage the projector.
y
Do not place the tripod on an unstable surface.
y
Be sure to use a tripod with a maximum load capacity of 3 kg or more.
y
To use the projector safely, position the tripod legs so that they are as wide and
stable as possible and be sure to securely attach the projector to the tripod.
Kensington Security System
y
This projector has a Kensington Security Standard connector. Connect a Kensington
Security System cable as shown below.
y
For more information on installation and use of the Kensington Security System,
refer to the user’s guide provided with the Kensington Security System.
y
The Kensington Security System is an optional accessory.
y
What is Kensington? Kensington is a
company that provides security systems
for laptops and other electronic devices.
Website: http://www.kensington.com
To Next Page
Loading...
Need help?
General
