27
WATCHINGWITHTHEPROJECTOR
WATCHINGWITHTHEPROJECTOR
Connectingthe
AntennaorCable
To watch TV using an indoor/outdoor
antenna, connect a wall terminal to the
antenna terminal of the projector using a
RF cable (75 Ω).
You can watch public TV or cable (ana-
log, digital) TV.
(The RF cable is sold separately.)
NOTE
Be careful not to bend the copper
wire when connecting the coaxial
cable (75Ω). Fix the cable by turning
its connector clockwise.
CopperWire
Ensure you use a standard coaxial
cable (75Ω, sold separately) when
connecting to the projector input.
To obtain better image quality in lo-
cations where signal strength is low,
please purchase and install a signal
amplifier (booster).
A signal splitter is required if you
want to use two or more projectors
for watching with one antenna.
If you have any problems with an-
tenna installation, please consult the
antenna specialized retailer or the
store from which you purchased the
antenna.