26
USING YOUR WASHING MACHINE
Adjusts the m elody and button tones, Sig-
nal
The washing machine plays a melody when the
wash cycle
is finished. The buttons make a sound each time a
button is pressed. The melody and button tones can
be changed and off as desired.
1 Press
A
.
2 Turn
B
to the desired cycle.
3
Press
. Adjust the melody and button tones
as desired.
4 Press the desired option to use the other options.
5 Press
C
.
Prewashing,
Pre W ash
Pre-wash for 16 minutes when clothes are covered in
dirt or dust. This feature is suitable for heavily soiled
items.
1 Press
A
and turn
B
to select the desired cycle.
2 Press .
- light will turn on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press
C
.
Rinse, drain and spin only,
Rinse+Spin
Use this cycle to rinse detergent from load.
1 Press
A
and turn
B
to select the desired cycle.
2 Press .
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Pulse
C
.
Adding extra rinse cycle, Extra Rinse
Y ou can add an extra rinse cycle to the default rinse
cycle.
1 Press
A
and turn
B
to select the desired cycle.
2 Press .
- light will turn on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press
C
.
Presetting the start tim e,
Delay W ash
Y ou can set the desired start time.
1 Press
A
and turn
B
to the desired cycle.
2 Press the desired option to use the other options.
3 Press repeatedly to select the desired start
time.
-
light will turn on.
- The set start time appears on the display panel.
- E ach press of the button increases the delay
time by one hour, up to 19 hours.
4 Press
C
.
High tem perature,
Steam
Adding the Steam option to these cycles help to
enhance washing performance.
B y using a hot steam fabrics get the cleaning ben-
efits of a super hot wash.
1 Press
A
and turn
B
to select the desired cycle.
2 Press . The washer will automatically
adjust the
cycle settings.
3 Set any other desired options.
4 Press
C
.