39
ENGLISH
MAINTENANCE
WARNING
!
Unplug the power cord and turn off the faucets
before cleaning. Failure to do so may cause
electric shock.
!
Do not use the washing machine without the
inlet filters. If you use the washing machine
without the inlet filters it will cause leaks and
malfunction.
!
If you use the washing machine in an area with
hard water, the inlet filter may clog due to lime
buildup. Contact your nearest LG customer
service center if the inlet filter is not clean or is
missing.
NOTE
!
P
message will blink on the display when the
water pressure in the detergent drawer is weak
or an inlet filter is clogged with dirt. Clean the
inlet filter.
Cleaning the water inlet filters
Clean the water inlet filters periodically to prevent
clogging. Take extra care to clean the water inlet
filters for areas using hard water. Water may not be
supplied if there are foreign objects, such as rust,
sand, or stones in the water inlet filters.
1
Press
A
to turn off the washing machine and pull
out the plug.
2
Turn off the faucets connected with the water
inlets.
3
Remove the water inlets.
4
Pull out the water inlet filter.
Inlet Filter
5
Remove foreign objects from the water filter inlet.
- Soak the water filter inlets in white vinegar or
a lime scale remover or use a toothbrush to
remove foreign objects and rinse thoroughly.
6
Press the water filter inlets back into place.
7
Reattach the water lines to the washing machine.
To Next Page
Loading...
Need help?
General
