40
MAINTENANCE
Cleaning the drain pum p filter
The washing machine fails to drain if the drain pump
filter is clogged. Periodically clean the drain filter to
prevent clogging with foreign objects.
1
Press
A
to turn off the washing machine and pull
out the plug.
2
Open the drain pump filter cover.
3
Unclip the drain hose and remove the plug from
the drain hose to drain the remaining water.
4
Twist the pump filter counterclockwise to remove.
5
Clean the pump filter and opening.
6
Recap the plug onto the drain hose and reattach
the drain hose.
7
Insert the drain pump filter.
8
Close the drain pump filter cover.
WARNING
!
M ake sure to pull out the plug before cleaning.
Failure to do so may cause electric shock.
!
Opening the drain filter will result in water
overflowing if there is water in the washer tub.
M ake sure to check if the water is completely
drained before opening the drain filter.
!
If you use the washing machine with the drain
filter reassembled incorrectly after cleaning it,
or if you use the machine without the filter, it
may cause leaks or malfunction of the washing
machine.
NOTE
!
Q
message will blink when the drain pump
filter is clogged with dirt. Clean the drain pump
filter.
To Next Page
Loading...
Need help?
General
