Setting the Timeout
saves the data into the Rx, RxHex, Hash
Command and Response
ç
æ
Parameters
The 0 means the timeout is disabled, min. value
Example
ç
æ
the clear() method is called.
follow each other, the action will execute once
Command and Response
ç
æ
Parameters
The
Example
ç
æ
or until the clear() method is called.
Command and Response
ç
æ
Example
ç
æ
Clearing the Last Recognized Stored Message
Rx, RxHex and Hash properties.
Command and Response
ç
æ
Example
ç
æ
temporaryActiveTimeout
property is elapsed, the property is cleared.
follow each other, the action will execute every occasion.
ActiveTimeout it will be
Command and Response
ç
æ pr
Parameters
The
Example
ç
æ
ActivePropertyTimeout is elapsed only.