5. Software Control – Using Lightware Device Controller DVI-OPT-220-Pro series – User's Manual 18
Input1: The window shows the adjustable parameters for the input.
Output1 and 2:
Input Parameters
Parameters
The factory default settings give good results in most cases. Please consult Lightware support for further
information if encountering problems with signal quality.
Reload factory defaults
Default values are reloaded to the input.
EDID Menu
Advanced EDID Management can be accessed by selecting the EDID menu. There are two panels: left one
contains Source EDIDs, right one contains Destination slots where the EDIDs can be emulated or copied.
Control buttons
Export
Exporting an EDID (save to a
Executing EDID emulation or
copying (Transfer button)
Import
Importing an EDID (load from a
Delete selected
Deleting EDID (from User
memory)
Info
Display EDID Summary window
Select all
Selecting all memory places
in the right panel
Edit
Opening Advanced EDID Editor
with the selected EDID
Select none
Selecting none of the
memory places in the right
panel
Create
Opening Easy EDID Creator
To Next Page
Loading...
Need help?
General