1. Introduction UCX series – User's Manual 10
Features of the Device
Common Features
3D and 4K Support
High bandwidth allows extension of resolutions up to 4K and even 3D sources and displays are
supported.
Pixel Accurate Reclocking
Each output has a clean, jitter free signal, eliminating signal instability and distortion caused by
Frame Detector and Signal Analysis
The exact video and audio signal format can be determined such as timing, frequencies, scan
mode, HDCP encryption, color range, color space and audio sample rate.
Autoselect Function for Video and USB Inputs
The Autoselect feature can sense the port status on the video input and USB Host ports and
select them automatically. Priority number can be set for each input port and the feature allows
De-embedder Function
The analog audio can be de-embedded from HDMI inputs and it can be routed to the analog
audio output.
HDCP-compliant
disabled when non-protected content is used.
Dark Mode* #new
Ethernet Control
LWR
Basic IT-security* #new
These entry-level network security improvements help to prevent unauthorized access to the
RS-232
Bi-directional RS-232* #new
supports any unit that works with standard RS-232.
GPIO Control Port
Occupancy Sensor Connector
USB 3.1 Switch
The USB 3.1 layer provides the switching of four external USB peripherals (e.g. webcamera,
speakerphone, multitouch display, etc.) to four independent host computers or laptops.
Lightware Rest API* #new
The UCX switcher can be controlled through standard HTTP(S) requests to ensure the control
functions from REST clients or terminal program.
UCX-2x1-HC30, UCX-4x2-HC30 , UCX-4x2-HC30D
USB Type C Source Connection
USB Type C port ensures USB-C connectivity to the source device with USB 3.1 data and
device (e.g. BYOD laptop or smartphone).
UCX-4x2-HC30D
Dante
®
or AES67 Audio De-embedding
The audio of the HDMI signal can be transmitted as a 2-channel Dante® or AES67 source from
the -D model over the dedicated RJ45 connector.
*
To Next Page
Loading...
Need help?
General
