UCX series – User's Manual 83
Set Autoselect Operation Mode
Request and Response
ɯ <ip>
ɯ body: <op_mode>
ɮ header: 200 OK
ɮ body: <op_mode>
Parameters
Parameter Parameter description
<op_mode> Operation mode
Follow video
Follows the video crosspoint state
automatically.
Off
Autoselect function is disabled.
Example
ɯ
ɯ body: Follow video
ɮ header: 200 OK
ɮ body: Follow video
Set the Followed Video Port to Autoselect
Request and Response
ɯ <ip>
ɯ body: <out>
ɮ header: 200 OK
ɮ body: <out>
Example
ɯ
ɯ body: O1
ɮ header: 200 OK
ɮ body: O1
Lock the Audio Port
Request and Response
ɯ <ip><audio_port>
ɯ body: <locked_state>
ɮ header: 200 OK
ɮ body: <locked_state>
Parameters
Parameter Parameter description
<audio_port> Audio Port
I1-I4
O3
Audio input port number
Audio output port number
<locked_state>
true
false
The port is locked
The port is unlocked
Example
ɯ
ɯ body: false
ɮ header: 200 OK
ɮ body: false
Mute the Audio Port 1.
INFO: Suspends the connection of the chosen port (no signal is forwarded).
Request and Response
ɯ <ip><audio_port>
ɯ body: <muted_state>
ɮ header: 200 OK
ɮ body: <muted_state>
Parameters
Parameter Parameter description
<audio_port> Audio Port
I1-I4
O3
Audio input port number
Audio output port number
<muted_state> Muted state
true
false
The port is muted.
The port is unmuted.
Example
ɯ
ɯ body: false
ɮ header: 200 OK
ɮ body: false
INFO: All inputs and analog output ports have a mute property in the audio XP (e.g. <ip>
▪ <ip>
▪ <ip>
▪ <ip>
To Next Page
Loading...
Need help?
General
