28
AUTO STANDBY • Select 3H or 4H (hours) to set the idle length.
While idling, a pop up warning window will
display for 10 seconds before the unit turns
itself o. Press any button to extend the
time.
• Select OFF to turn o the auto standby function.
4. Press the SETUP button to exit the menu.
Customising the Audio Settings
1. Press the SETUP button to display the
setup menu.
2. Press the buttons to select AUDIO
SETUP PAGE.
3. Press the buttons to select the
following options and then press the
buttons to change the setting.
DOWNMIX Allows you to set the stereo analogue output of your DVD
player.
• LT/RT
Select this option if your DVD player is connected to a
Dolby decoder.
• STEREO
Select this option to change channel output to stereo
which delivers sound from only the two front speakers.
DIGITAL OUTPUT Selects the SPDIF Output.
• SPDIF O
Turns o the digital output.
• SPDIF/RAW
If you have connected your DIGITAL AUDIO OUT to a
multi-channel decoder/receiver, select this option.
• SPDIF/PCM
Only if your receiver is not capable of decoding multi-
channel audio should you select this option.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FULL
OFF
-
-
LT/RT
STEREO
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
STR
L-MONO
R-MONO
MIX-MONO
DUAL MONO STR
DYNAMIC
- - AUDIO SETUP PAGE - -
DOWNMINX
DIGITAL OUTPUT
DOLBY DIGITAL
STR
RAW
GOTO AUDIO SETUP PAGE
L10SPDV13_IB_161013_will.indd 28 13/10/2016 10:09 AM
To Next Page
Loading...
Need help?
General
