Fuel injection valve
The fuel valve is uncooled and placed in a sleeve in
the centre of the cylinder head.
O-rings around the fuel valve body prevent fuel and
lubricating oil from mixing. From the side of the cyl-
inder head, a lance for fuel supply is screwed into
the fuel valve (L16/24 is mounted by means of 3
leaf springs). The lance is sealed with a bushing and
two o-rings where the lance goes into the cylinder
head. A double-walled high pressure pipe connects
the fuel pump with the lance.
Leak oil from the fuel valve or from a possible
defective high pressure pipe is led to the bore for
the lance in the cylinder head. From here a pipe will
drain the fuel to the leakage alarm and further to the
leak oil connection. From here the HFO can be led
to leak oil tank and MDO/MGO to the day tank.
Figure 1: Fuel injection valve.
MAN Diesel & Turbo
3700222-2.0
Page 1 (1)
Fuel injection valve
B 11 00 0
L27/38S, L21/31S, L16/24S, L16/24, L21/31, L27/38
2015.11.27
To Next Page
Loading...
Need help?
General
