MasterCraft X25 User Manual

2013 MasterCraft Owners Manual • Care and Maintenance • Page 5-13
Upholstery
While the
vinyl is made to
withstand the
elements, it is im-
portant to care for
vinyl by keeping it
clean at all times.
Many substances
may stain the vinyl
if left untreated
over a period of
time. Remember
to remove any
contaminant and
clean vinyl imme-
diately.
Regular washing with mild detergent (see attached information) and warm water or
vinyl cleaners is sucient to keep the cushion and vinyl coverings in good condition. Do
not soak the cushion, and dry thoroughly after washing to prevent mildew accumulations
when the boat is covered. Spray the cushions with a mildew repellent and prop them up
in the boat when it is covered to take advantage of air circulation.
MasterCraft vinyl is made to withstand the eects of sun, heat, acid rain and soiling,
under normal conditions, but this does not preclude the cleaning requirements. Please
consult the following cleaning recommendations before cleaning your upholstery.
Certain household cleaners, powdered abrasives, steel wool, and industrial cleaners may
cause damage and discoloration, and are not recommended for use. Dry cleaning fluids and
lacquer solvents should not be used as they will remove the printed pattern and gloss. Waxes
are not recommended, as many contain dyes and solvents that can permanently damage the
vinyl’s protective coating.
In some instances, consumers have reported the appearance of a pink stain on vinyl
that is resistant to various cleaning methods. Although there can be other causes for
pink staining in vinyls, most pink stains are caused by dyes produced by micro-organ-
isms. These dyes are metabolic products of the micro-organisms, otherwise known as a
form of fungi.
It is virtually impossible for consumers to avoid these micro-organisms as they exist in
the atmosphere, which are more prevalent in high-humidity areas. Rain cleanses the air, with
the result being that the micro-organisms are deposited on items such as marine vinyl.
While the vinyl is treated to resist the growth of micro-organisms (meaning the vinyl is
not a food source), the stain results from failure to properly clean and maintain the vinyl.
This means that after use, the upholstery must be cleaned with a soft brush and warm
soapy water, followed by a thorough rinse with clean water.
This situation is worsened if the boat is stored without proper ventilation or if the boat
cover is put on while the vinyl is still wet, creating a situation in which all forms of fungi
(mold and mildew) thrive.
Failure to follow these instructions in the proper care of upholstery may cause
your warranty to be voided!
The cleaning table presented in this section is oered only as a suggestion and as an aid
in attempting to deal with stains. We do not guarantee that the cleaning methods will work.
Stains from any external source are unlikely to be covered by warranty.
Additional Upholstery Cleaning Information
The following information refers to the performance of the upholstery product in
specific tests conducted under laboratory conditions. Results may vary under actual
conditions. This information is not a guarantee and does not relieve the user from the
responsibility of the proper and safe use of the product and all cleaning agents. The use
of certain agents can be harmful to the surface appearance and lifespan of the vinyl. The
vinyl manufacturer and MasterCraft assume no responsibility resulting from the use of
such cleaning agents to the vinyl. Please check compatibility when using this product in
combination with painted or varnished surfaces.

MasterCraft X25 Specifications

General

Brand	MasterCraft
Model	X25
Category	Boat
Language	English