Matrix SPARSH VP210 User Manual

Matrix SPARSH VP210 User Guide 120
• The phone will be assigned IP Address, Subnet Mask, Gateway Address, DNS Address and Server
Address automatically by the DHCP Server.
If your DHCP Server does not provide DNS Settings and/or Server Settings automatically, you must
configure them manually. Refer the steps given in Static.
Static IP Parameters
If you select Static, configure the following.
• Scroll using the Up/Down Navigation Key to select Static IP Parameters and press Select Key.
• Scroll using the Up/Down Navigation Key to enter the IP Address, Subnet Mask and Gateway
Address.
• Press OK Key.
DNS Settings
• Scroll using the Up/Down Navigation Key to select DNS Settings and press Select Key.
• Scroll using the Up/Down Navigation Key to enter the Primary DNS Address and Secondary DNS
Address.
• Press OK Key.
Server Settings
• Scroll using the Up/Down Navigation Key to select Server Settings and press Select Key.

Matrix SPARSH VP210 Specifications

General

Brand	Matrix
Model	SPARSH VP210
Category	IP Phone
Language	English