Matrix SPARSH VP210 User Manual

121 Matrix SPARSH VP210 User Guide
• You can turn on Secure Connection, to do so press Change Key.
Scroll using the Up/Down Navigation Key to:
• Enter the Primary Server Address. This is the IP Address or the Domain Name of the Sever (System)
with which you want to register the phone.
• Enter the Primary Server Port. This is the SPARSH Port of the System. It can be 80 or any value
ranging from 1025 to 65535.
• If required, you can also enter the Secondary Sever Address as a fallback option. If the registration
with the Primary Server fails the phone will send the registration and configuration requests to the
Secondary Server Address. Speech-cut or unclear speech may be observed during on-going mature
calls.
• Enter the Secondary Server Port. The phone sends the request for configuration files to this port if the
Primary Server fails. It can be 80 or any value ranging from 1025 to 65535.
• Press OK Key.
VLAN Settings
If your phone is connected to a Virtual LAN, configure the VLAN Settings. To route packets of the LAN and the PC
ports of the phone through a VLAN switch, they must be tagged with a VLAN header. This header consists of a
VLAN ID and a Class of Service (CoS).
• Scroll using the Up/Down Navigation Key to select VLAN Settings and press Select Key.
• You can turn on LAN VLAN/CoS Connection, to do so press Change Key.

Matrix SPARSH VP210 Specifications

General

Brand	Matrix
Model	SPARSH VP210
Category	IP Phone
Language	English