19
CHAPTER 5: MANAGER MODE
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Altitude Default: Below
5000 feet
This option allows the club to setup the treadmill for a higher
altitude.
Below 5000 feet or
Above 5000 feet
Virtual Active
Default: Off
This option controls the Virtual Active function. Off or On
Belt Stop
Default: Off
This option is to check the running belt to see if a user is there.
If there is no user, and the status is over the default time, the
machine will enter into a pause mode for 5 minutes. If no user
is present within 5 minutes, the display will return to the start up
screen.
Off, 30, 60, or 90
MANAGER MODE
Other
5.8 MANAGER MODE - OTHER TAB
To Next Page
Loading...
Need help?
General
