Matrix
114
Vision System Manual
Flexible Numbers
What’s this?
Vision offers flexibility to assign a number of your choice to a station. This code is called flexible number. For
example, to access first station having software port 00, one has to dial 21. It is possible to change this code to
any other number of your choice.
The system loads default access codes (flexible numbers) to all the stations on first power ON. Later on the
stations can be assigned desired flexible numbers.
How to program?
Use following command to program the flexible number for a station:
4201-1-Station-Flexible Number-#*
Where,
Station is from 00 to 08.
Flexible Number can be of 1, 2, 3 or 4 digits.
Terminate the command using #* is flexible number is of less than four digits.
Use following command to default the flexible numbers of all the stations:
4201-*-#
A typical table of default flexible numbers looks like:
Software Port Flexible Number
00 21
01 22
02 23
03 24
04 25
05 26
06 27
07 28
08 29
Use following command to clear the flexible numbers of all the stations:
4201-*-0
Example:
Software port 00 to 03 should be assigned flexible numbers as 31 to 34 and software port from 04 to 07 should
be assigned flexible numbers as 21 to 24.
4201-1-00-31#*
4201-1-01-32#*
4201-1-02-33#*
4201-1-03-34#*
4201-1-04-21#*
4201-1-05-22#*
4201-1-06-23#*
4201-1-07-24#*
Important Points:
• Flexible numbers are the codes dialed from dial phase to call another station. These flexible numbers should
be unique and should not match with any other station or any of the features available from the dial phase.
• It is possible to have single digit, 2-digit, 3-digit and 4-digit flexible numbers.
To Next Page
Loading...
Need help?
General
