Matrix Vision User Manual

Vision System Manual
181
Matrix
Time Table
What’s this?
• A station user having access to long distance dialing would prefer this facility disabled to avoid misuse during
nighttime once the office is closed. Trunks calls should be routed to the security staff when the office is
closed. Few calls should be forwarded to an external number during nighttime.
• Above examples highlight the need for the system to behave differently depending on the time of the day.
The Vision offers flexible programming for daytime and nighttime. A day can be divided in two time zones viz.
Daytime (working hours) and Nighttime (non-working hours). Each day of the week can be programmed for
different daytime and nighttime. Such a schedule of a week is called time table.
Time Table
Start Time End Time Start Time End Time
Sunday
HH:MM HH:MM HH:MM HH:MM
Monday
HH:MM HH:MM HH:MM HH:MM
Tuesday
HH:MM HH:MM HH:MM HH:MM
Wednesday
HH:MM HH:MM HH:MM HH:MM
Thursday
HH:MM HH:MM HH:MM HH:MM
Friday
HH:MM HH:MM HH:MM HH:MM
Saturday
HH:MM HH:MM HH:MM HH:MM
Daytime Nighttime
Time Zone
Week days
Default Time Table
Start Time End Time Start Time End Time
Sunday
00:00 00:00 00:00 23:59
Monday
09:00 18:00 18:00 09:00
Tuesday
09:00 18:00 18:00 09:00
Wednesday
09:00 18:00 18:00 09:00
Thursday
09:00 18:00 18:00 09:00
Friday
09:00 18:00 18:00 09:00
Saturday
09:00 13:00 13:00 09:00
Daytime Nighttime
Time Zone
Week days
Generally following features/facilities can be programmed differently during daytime and nighttime.
• Class of Service
• Toll Control
• Trunk Access
• Trunk Landing Destination
• Trunk Hunting Scheme
• Features like ECF, DID, DOSA, etc.
Vision offers two modes of operation viz. Manual and auto. If the system is set for manual mode, the system
should be programmed for daytime or nighttime manually. This mode is useful in offices where there are no
fixed office hours or at residences where two different set of features/facilities are not required. If the system is
set for Auto mode, the system itself switches from daytime to nighttime and viceversa.
How to program?
Step 1: Set the time table in Manual or Auto mode using command 1051.
Step 2: Set Day or Night mode using command 1052 (if manual mode is selected).
Step 3: Program the time table for the week using command 1053.

Matrix Vision Specifications

General

Brand	Matrix
Model	Vision
Category	PBX
Language	English