101
Controls in detail
Seats
When entering the vehicle, with the
easy-entry/exit feature activated, the
steering wheel will return to its last set po-
sition when you
앫 close the driver’s door with the ignition
switched on,
or
앫 insert the SmartKey into the starter
switch with the driver’s door closed.
Removing and installing front seat
head restraints
For more information on head restraint ad-
justment, see the “Getting started” section
(
컄 page 39).
Front seat head restraints
1 Switch
Removing front seat head restraint
왘 Press switch 1 upwards and hold until
the head restraint is fully extended.
왘 Pull head restraint out.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
i
Tilt the seat backrest rearward for eas-
ier removal and installation of the head
restraints.
To Next Page
Loading...
Need help?
General
