123
Controls in detail
Control system
ì™” Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position 1. The control system
enables you to
ì•« call up information about your vehicle
ì•« change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster display
and much more.
The control system relays information to
the multifunction display.
Multifunction display
1 Trip odometer
2 Main odometer
3 Outside temperature
4 Clock
1
5 Current gear selector lever position
6 Transfer case program mode
Warning! G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
1
See separate operating instructions for the
COMAND system for clock setting.
To Next Page
Loading...
Need help?
General
