335
Practical hints
Replacing bulbs
Notes on bulb replacement
ì•« Use only 12 volt bulbs of the same type
and with the specified watt rating.
ì•« Switch lights off before changing a bulb
to prevent short circuits.
ì•« Always use a clean lint-free cloth when
handling bulbs.
ì•« Your hands should be dry and free of oil
and grease.
ì•« If the newly installed bulb does not
come on, visit an authorized
Mercedes-Benz Light Truck Center.
Have the LEDs for the following lamps re-
placed by an authorized Mercedes-Benz
Light Truck Center.
ì•« Additional turn signals in the exterior
rear view mirrors
ì•« High mounted brake lamp
ì•« Lamps in the exterior rear view mirrors
Warning! G
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Keep bulbs out of reach of children.
Halogen lamps contain pressurized gas.
A bulb can explode if you:
ì•« touch or move it when hot
ì•« drop the bulb
ì•« scratch the bulb
Wear eye and hand protection.
i
Have the headlamp adjustment
checked regularly by a Mercedes-Benz
Light Truck Center.
Do not turn the headlamp adjusting
screws. If the adjusting screws are
turned, the headlamp adjustment must
be checked by a Mercedes-Benz Light
Truck Center.
To Next Page
Loading...
Need help?
General
