145
Controls in detail
Control system
Resetting fuel consumption statistics
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see the reading that you want
to reset in the display.
왘 Press and hold the reset button in the
instrument cluster (
컄 page 120) until
the value is reset to
0
.
Call up range (distance to empty)
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see this message in the dis-
play:
RANGE
.
In the display you will see the calculat-
ed range based on the current fuel tank
level.
TEL menu
i
All statistics stored since the last en-
gine start will be reset approximately
four hours after the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch.
Resetting will not occur if you turn the
SmartKey back to position 1 or 2 with-
in this time period.
Warning! G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving. For your safety and the
safety of others, we recommend that you
pull over to a safe location and stop before
placing or taking a telephone call. If you
choose to use the telephone while driving,
please use the hands-free device and only
use the telephone when weather, road and
traffic conditions permit.
Some jurisdictions prohibit the driver from
using a cellular telephone while driving a ve-
hicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
컄컄
To Next Page
Loading...
Need help?
General
